Are you currently experiencing issues with using power stations? Such as

1. Not often used, only remembering it in emergencies, but:

• After being stored for some time, when I tried to turn it on again, it wouldn't work;
• When I use it, the battery capacity is not enough, and it runs out of power quickly;
• The power output is insufficient when in use, unable to support many commonly used appliances;
• Sometimes, when used incorrectly, it breaks down easily.

2. Frequent power outages or power supply only lasts for a few hours per day:

• It's often not fully charged before the next power outage, resulting in insufficient battery power.
• It doesn't support charging and discharging simultaneously, so the battery cannot be kept fully charged continuously.

Don't worry about that! Flashfish provide the optimal solution.

A One-Stop Solution for All Power Station Issues, Providing Stable and Efficient Power by Your Side.

Faced with the frequent issues encountered in the use of various power stations and the ever-increasing global demand for backup power, Flashfish brings you a brand-new solution.

The FT3600 with LFP2300 Backup Power Supply is a highly efficient and stable power station that not only resolves all the aforementioned issues, but also offers an unbeatable price point.

So, what does it offer?

High Frequency 3600W Inverter

——Big Power, Low loss, Non-damaging to home appliances

• 120V 60Hz 3600W Max AC output;
• 7200W Max instant AC output;
• 96% Energy conversion efficiency(DC to AC);
• Pure sine wave AC Output;
• Support input/charging: AC 96V-260V; Unstable waveform; Unstable voltage;
• Support Protection: Overvoltage, Undervoltage, Overload, Short-Circuit, Overheat, Islanding, Overcurrent, etc.

3 Switchable Output Modes

• Switchable AC output volt: "100V" "110V" "120V" "220V" "230V" "240V" ;
• Switchable AC output frequency: "50Hz" or "60Hz"
• Switchable DC output volt: "12V" or "24V"
• More switchable modes>>>

In off-grid operation mode, the FT3600 impressively boasts the capability to directly deliver 120/240V split-phase power, effortlessly catering to households' demands for utilizing two diverse voltage loads concurrently — without any fuss of procuring or employing additional conversion equipment. Similarly, it seamlessly offers direct 12/24V DC power output, eliminating the need for additional adapters or converters.

Furthermore, the FT3600 stands out with its versatility to adjust output frequencies, empowering it to power a diverse array of home appliances or specialized equipment with specific frequency prerequisites.

The fusion of these three indispensible functionalities, paired with its robust 3600W output power, propels the FT3600 to address a broader spectrum of emergency power scenarios, ensuring uninterrupted and reliable power supply.

Automotive-grade LiFePO4 Cells

• Battery cell provide by BAK, brand new and Grade-A;
• 100% DOD, 3500+ cycles to 80% Original Capacity;
• Storage loss at 60% battery charge: Approximately 15% over a period of 1 year;
• Modular battery, with a capacity of 2300Wh/Unit.

The purpose of LFP2300 using high-quality lithium iron phosphate batteries is to ensure the long lifespan and high durability of battery cells for users, thus reducing the costs incurred by frequent battery replacements.

With low storage loss, the LFP2300 has a stronger capacity for idle storage over a two-year period, resulting in a lower probability of battery damage. After being stored for a period of time and then reused, it can easily recover its original capacity, indistinguishable from a brand-new battery.

The modular design makes these battery cells reliable solutions for storage and backup power, ensuring a stable power supply when needed.

Dual-Mode Flash Charging≈2300W

Charging LFP2300 using FT3600 through the wall socket:

• 1750W Max, 0-100% in 1.3 hours;

Charging LFP2300 using its charging adapter through the wall socket:

• 876W, 0-80% in 2 hours. 80-100% about 0.5 hours.

When facing frequent power outages, it is essential to prepare sufficient battery modules, as this allows you to use electrical appliances without any worries.

Assuming a man who have 3 unit LFP2300 battery modules with 0% charge, when the power grid is restored, he can fully charge the 3 unit 2300Wh LFP2300 battery modules in less than 3 hours using the electricity from the grid, quickly preparing for the next power outage.

Based on the above example, the charging speed reaches 2300W/hours, which is far ahead in this industry.

(Note: The 876W battery charging adapter is not included in the set, and it needs to be purchased separately.）

2000W Pro·Mix Lightning Charging

• DC(Solar/Wind/Car/...) charging: 800W Max;
• Wall socket + DC(Solar/Wind/Car/...) Mix charging: 2000W Max;

The 800W DC input of the FT3600 boasts robust capabilities, supporting multiple charging modes such as solar, wind, and car charging, offering users a wide range of flexible charging options that break free from the constraints of traditional grid power.

With a maximum hybrid charging power of 2000W, users can simultaneously utilize both AC and DC charging methods, and its intelligent management system can intelligently distribute and optimize charging power to ensure optimal charging results.

By harnessing renewable energy or hybrid charging with grid power, the FT3600 significantly reduces long-term power costs, delivering significant economic benefits to users.

The real-time DC charging power is always utilized first. If the upper limit of hybrid charging has not been reached, grid power will be used to supplement the charging power to achieve the maximum hybrid charging power of 2000 Watt.